When you’re adjusting coilovers, you need to know precisely what you’re doing, because if you don’t, you can not only damage your car, but you can also end up with a terrible ride. The best thing to do when you want to improve your car’s handling is to get a professional on the case.
However, if you’re installing your ground control coilover sleeves yourself, you should have a plan about how to do it. That’s what we look at here, as we tell you a simple way to ensure that everything is balanced and even. It’s the only way to ensure that you get the performance improvement your investment calls for.
Installing Ground Control Coilover Sleeves Yourself
If you are indeed trying to install your new suspension gear yourself, it can be difficult to know how to get all four wheels lowered to the same exact level. The good news is that there is a relatively simple way to set every wheel at the same level. It’s also something that doesn’t require any specialist equipment to achieve.
The first job when installing your ground control coilover sleeves is to jack your car up, ensuring that you’re on level ground that all safety precautions are taken.
Methodically Adjust One Coilover Sleeve at a Time
The next step is to adjust the first coilover sleeve to exactly where you want it and then lower the car back down. Next, you will want to measure from the center of the wheel to the fender lip, which will give you your magic measurement figure. Then it’s simply a matter of repeating the process and checking that all wheels are matched to that figure to guarantee that all 4 ground control coilover sleeves are evenly adjusted.
Whichever way you adjust yours, it’s imperative that they’re all adjusted evenly or you’ll end up with exactly the opposite experience that was intended when you made the investment for your car. Poor handling, compromised braking and uneven tyre wear are just three of the symptoms that your coilover sleeves aren’t even.
Professional Help With Ground Control Coilover Sleeves
We know that there are many people out there who have all the necessary skill to install their own automotive suspension products themselves. However, if you don’t fall into that category and you’re still thinking of installing them yourself, we’d urge you to reconsider, as poor installation will rob you of the benefits of having aftermarket suspension in the first place.
Anyway, before you get to that point, you need to source your ground control coilover sleeves and we can’t think of a better place to get yours than from Springrates. They not only have an extensive selection of top-quality suspension parts from all the main manufacturers, but their prices are very reasonable and they offer free shipping anywhere in the US.
Visit them online at www.springrates.com and see what we mean. While you’re there, why not check out their flexible payment options that all you to spread the cost of your suspension parts. That’s all from us, we’ll see you next time.